AH-64D Longbow conversion kit

AH-64D Longbow conversion kit

$55.00Price
The Apache Longbow conversion kit is a upgrade to the avionics bays on our AP100 AH-64A Apache 50 fuselage kit, which are mounted below the cockpit and run from the nose to the rear of the armament stub wings. The avionics bays are the only obvious differences in this conversion between the AH-64A and 64D Apache variants when looking at the fuselage. Simply exchange the parts in the Apache 50 fuselage kit during assembly.
  • Details

    Some care is needed during assembly because the left and right sides of the avionics bays are not the same. Take your time and build one left and one right side. Whether your mechanics are glow powered or electric, spend a little time to plan out which access panels can be installed to house switches, remote glow plug connectors and charge recepticles.
    Compatible Fuselage List:
    Designed for the AP100 Apache AH-64A fuselage kit.

    Feature List:
    High quality laser cut balsa and plywood interlocking parts.
    Full size building plan with instructions.

    Front Right Side

    The D-Variant avionics bays wrap around the front of the nose on the Apache and are taller than on the A-Variant. Also note that the right and left side of the bays different and care must be taken during assembly to build one left and one right.
    Right Profile

    The avionics bays are distinctly segmented as they run from the the front of the fuselage to behind the stub wings. The right side runs flat under the stub wing as compared to the right that is angled and is flush with the leading edge of the stub wing before jogging below it.
    Rear Left Side

    Most noticeable is the larger segment at the rear of the avionic's bay that is both taller and flairs outward and at an angle from the fuselage. This rear portion is the same on both left and right sides.

ADDRESS

2235 Centurian Cir.

New Caney, TX, 77357

Sales:      (281) 601 7805

                    cdebock@robcon-rc.com

Design:   (720) 308 0039

                     rdebock@robcon-rc.com



All products designed and built in the USA.

 

  • c-facebook

© Copyright ROBCON Inc. all rights preserved.